Parts And Components; Before Use; Operation; Cleaning And Maintenance - cecotec READY WARM 9790 FORCE Bedienungsanleitung

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
1. Temperature selector
2. Power-level selector
3. Power light indicator

2. BEFORE USE

Take the product out of the box and remove all packaging material.
Check for any visible damage, if any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.
Place the heater on a flat and stable surface.

3. OPERATION

Turn the power selector to select the desired power level.
Symbol
Fig. 2
Fig. 3
Fig. 4
Fig. 5
The temperature can be adjusted from 0 ºC to 40 ºC. Turn it clockwise to increase the
temperature or anticlockwise to decrease it.

4. CLEANING AND MAINTENANCE

Always turn off, unplug and allow the appliance to cool down before cleaning.
Do not use abrasive scouring pads, powders or cleaners to clean the product.
Use a soft, dampened and clean cloth to clean the product's outer housing. Be careful not to
touch the heating elements.
If the heater is not going to be operated for a long period of time, store it in a dry and safe place
where it is protected from dust.
20 READY WARM 9790 FORCE
Function
Off
Fan
Low-power heating
High-power heating