Before Use; Product Assembly; Operation - cecotec Ready Warm 7200 Quartz Rotate Smart Bedienungsanleitung

3. BEFORE USE

1. Take the product out of the box and remove all packaging materials.
2. Inspect the appliance for any visible damage, if it is observed, contact as soon as possible
the Technical Support Service of Cecotec for advice or reparation.
3. Place the heater on a flat and safe surface and make sure not to place under a power
socket.

4. PRODUCT ASSEMBLY

Warning: make sure the product is properly assembled before operating.
1. Remove the butterfly nuts from the lower part of the appliance.
2. Pass the power cord through the slot located in the centre part of the base plate and then
assemble the appliance's body to the base plate.
3. Secure the appliance's body to the base plate by means of the two butterfly nuts pre-
viously removed.
4. Insert the power cord through the suitable slots and then fix it by the clamp.

5. OPERATION

Power levels (
The heating power levels can be set by pressing the buttons placed on the bottom part of the
appliance.
• 0: OFF
• 1: 400 W
• 2: 800 W
• 3: 1200 W
Oscillation (
)
The appliance includes an oscillation-function button. Press once to activate it and press again
to deactivate it.
Remote control
The heater's power levels and functions can be controlled through a remote control.
Timer ( )
Press the timer button to activate this function. The lights will turn on showing the selected time.
Safety system
This appliance is fitted with a safety system which automatically turn off the device when
tilted or lifted.
05325 Ready Warm 7200 Quartz Rotate -manual- MV.indd 11
)
READY WARM 7200 QUARTZ ROTATE SMART
ENGLISH
11
6/8/18 5:28