Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Alpha Lock Installation
1.
Reinstall the metal forming
plate with the four M6 x 12
capscrews. (Fig. 39)
Metal Forming Plate
39
2.
Drill a 6 mm hole through
the fifth hole. (Fig. 40)
40
3.
Remove the metal forming
plate.
4.
Deburr the holes.
Alpha Interlock Suspension Systems
Preparing the
Lock Body:
1.
M6 Capscrews
2.
Drill Here
Install the lock body with
duckbill expulsion valve onto
the distal adapter. Make sure
that the expulsion valve's
position matches that of the
distal adapter. (Fig. 41)
Expulsion Valve
41
Push the porous plastic insert
into the lock bodyair expulsion
hole and cut with a knife so that
it is flush with the lock. (Fig. 42)
Porous
Plastic
42
Insert
ES
FR
User Manual
EN
D D
DE
EN-21
Werbung
Inhaltsverzeichnis
