Teufel Alpha Interlock Gebrauchsanweisung Seite 34

ES
FR
EN Alpha Interlock Suspension Systems
D D
DE
AIS Alpha Interlock Suction
Optional Accessories
REF
WW.700-AIS102
WW.700-AIS486
WW.700-AIS489
Application/
Adjustment
Preparing the Positive Model
1.
Make the positive model.
2.
Shave 13-15 mm off the distal
end of the positive model to
provide a flat surface that
is the same diameter as the
fabricating post. (Fig. 1)
Flat Surface
1
EN-10
User Manual
ProduCt
AIS Distal Adapter, including Fabricating Post
AIS Insert for Retrofitting
Alpha Lock Sealing O-Ring, 10pcs
3.
Place the fabrication post on
the distal end of the model. The
position of the pin determines
the position of the release
button (usually distal). (Fig. 2)
Fabrication
Post
2
4.
Secure the fabricating post
with the four finishing nails.
Dowel Pin