Teufel Alpha Interlock Gebrauchsanweisung Seite 36

ES
FR
EN Alpha Interlock Suspension Systems
D D
DE
For a Thermoplastic
Socket
1.
Position the distal adapter
on the fabrication post. The
side of the distal adapter
marked „lateral side" should
point toward the lateral side
of the model. Snap the post
ring onto the fabrication post.
Please Note: Both O-rings
have to be positioned in
the grooves of the distal
adapter. (Fig. 7)
7
2.
Degrease the thread of the
distal adapter and the center
section with acetone in order
to prevent the sticker from
slipping. Place the round
sticker in the center of the
EN-12 distal adapter, and place a post
User Manual
Post Ring
Distal
Adapter
3.
sticker onto each of the four
raised surfaces of the distal
adapter. (Fig. 8/9)
Round
Sticker
Post Decals
8
9
Put the thermoplastic
sheet material (e.g. „Ortho-
therm Clear 12 mm, REF
70.612.012.01" for BK
sockets, at about 160°C) in a
vacuum frame, and heat it for
about 25 min. in a convection