Stihl RE 361 Gebrauchsanleitung Seite 38

English
Disconnect the high-pressure hose
4
3
1
2
Release the hose reel brake
N
To release the hose reel brake, push the
button (1) down and turn it
counterclockwise.
To lock the hose reel in position, turn the
button (1) controlling the hose reel brake
clockwise and turn the crank handle a
little way until it engages.
Unroll the high-pressure hose (2)
N
Open the hose guide (3)
N
Unscrew the union nut (4)
N
Pull high-pressure hose (2) off of
N
connector
Connecting the high-pressure hose
Push the high-pressure hose (2)
N
onto the connector of the hose reel
Attach union nut (4) and screw it on
N
and tighten by hand
Push the high-pressure hose into
N
the hose guide (3) and close the
hose guide.
Release the brake (1) on the hose
N
reel and wind up the high-pressure
hose
36
If necessary, the high-pressure hose
can be connected directly to the high-
pressure hose connection of the
machine.
For this purpose:
Loosen and remove the union nut of
N
the high-pressure hose connection
Unscrew the screw plug with a
N
size 8 hexagon socket wrench
Remove the high-pressure hose
N
from the hose reel
Connect the high-pressure hose as
N
for machines without hose reel
High-pressure hose and spray gun
Connection
2
3
1
Push the high-pressure hose (1)
N
onto the connector (2)
Attach union nut (3) and screw it on
N
and tighten by hand
RE 361, RE 361 PLUS, RE 461, RE 461 PLUS, RE 471 PLUS
Disconnection
4
3
Push the coupling (4) in the
N
direction of the arrow and hold it
Loosen the union nut (3) and
N
unscrew it from the connector in the
direction of the arrow
High-pressure hose extension
As a rule, always use only one high-
pressure hose extension – see "Special
accessories"