Connecting The Water Supply - Stihl RE 108 Gebrauchsanleitung

Disconnecting the high-pressure hose
2
Pull out the spring clip (1) and pull
N
the high-pressure hose (2) out of
the connector
Connecting the high-pressure hose
Push the high-pressure hose (2)
N
onto the connector of the hose reel
Push the spring clip (1) into the
N
connector
Connecting the high-pressure hose to
the spray gun
Fitting
4
5
3
Push the connector of the high-
N
pressure hose (3) into the mount on
the spray gun (4) – until it engages
Removing
Actuate the safety catch (5) and pull
N
the high-pressure hose (3) out of
the mount on the spray gun
RE 108, RE 118, RE 128 PLUS
High-pressure hose extension
As a rule, always use only one high-
pressure hose extension – see "Special
1
accessories"

Connecting the water supply

In suction operation, the machine can
also be connected to rivers, lakes,
cisterns and tanks, etc. – see
"Connecting to a pressureless water
supply".
Briefly rinse out the hose before
connecting it to the machine to prevent
sand and other particles from entering
the machine.
Connect hose
Connect hose to water supply (1/2"
N
diameter, length at least 10 m to
absorb pressure surges. Maximum
length 25 m)
2
1
Push the coupling (1) on to the hose
N
connector (2)
Turn on water supply
N
English
35