Specifications - Sony DK50-Serie Bedienungsanleitung

4. Specifications

Output
*1
Resolution
Measuring range
Accuracy (at 20°C)
Measuring Downward
force
Horizontal
(at 20°C)
Upward
Reference point
Maximum response speed
Vibration resistance
(10 to 2000 Hz)
Impact resistance (11 ms)
Protective structure
Operating temperature
Storage temperature
Power supply voltage
Power consumption
Cable length
Diameter of stem
*2
Mass
Feeler
Output cable length (up to
the electronic section)
Life time
Accessories
Note
*1 The resolution setting needs to be made when connecting to the LT30 series, MG series,
and LY70 series. For details, please refer to the respective instruction manual.
*2 The mass indicated is the total mass excluding the cable and interpolation box.
LT30 series
When the measuring range of the connected measuring unit is 100 mm or more and the
display resolution is set on 0.0005 mm, not all the measuring ranges can be displayed. (The
highest rank figure becomes the "F" display, which means an overflow.)
Therefore, set a display resolution on or below 0.001 mm.
4
(E)
DK50NR5 DK50PR5
A/B/Z phase voltage-differential line driver output
(compliant with EIA-422)
50 mm
2 µm
_
0.9 ±0.4 N
6.2 N or less
1.3 ±0.5 N
One location (at 1 mm position of spindle movement)
IP50 IP64
Approx. 360 g
Provided with a carbide ball tip DZ-122 (Mount screw M2.5)
Minimum 5 million cycles without shock
+P M4x5 screw (2 pcs.), Instruction Manual
DK100NR5
0.5 µm
100 mm
_
1.8 ±0.65 N
2.7 ±0.55 N
250 m/min
2
150 m/s
1500 m/s 2
IP50
0°C to 50°C
_20°C to 60°C
DC +5 V ±5%
1 W or less
Approx. 2.5 m
φ20
0
mm
_
0.013
Approx. 630 g
22 m max.
DK100PR5
4 µm
9.3 N or less
IP64
DK50 / DK100 Series