Specifications - Sony DK110NLR5 Bedienungsanleitung

4. Specifications

Output
*1
Resolution
Measuring range
Accuracy (at 20°C)
Reference point
Maximum response speed
Vibration resistance
(10 to 2000 Hz)
Impact resistance (11 ms)
Protective structure
Operating temperature
Storage temperature
Power supply voltage
Power consumption
Cable length
Diameter of stem
*2
Mass
Feeler
Output cable length (up to
the electronic section)
Life time
Accessories
Note
*1 The resolution setting needs to be made when connecting to the LT30 series, MG series,
and LY70 series. For details, please refer to the respective instruction manual.
*2 The mass indicated is the total mass excluding the cable and interpolation box.
LT30 series
When the measuring range of the connected measuring unit is 100 mm or more and the
display resolution is set on 0.0005 mm, not all the measuring ranges can be displayed. (The
highest rank figure becomes the "F" display, which means an overflow.)
Therefore, set a display resolution on or below 0.001 mm.
4
(E)
DK110NLR5
A/B/Z phase voltage-differential line driver output
(compliant with EIA-422)
One location (at 5 mm position of spindle movement)
250 m/min
1500 m/s
0°C to 50°C
_20°C to 60°C
DC +5 V ±5%
1 W or less
Approx. 2.5 m
φ20
Approx. 800 g
DZ-121 (Mount screw M2.5)
22 m max.
Minimum 5 million cycles without shock
+P M4x5 screw (2 pcs.), feeler DZ-121,
lift lever DZ-161, Instruction Manual
0.5 µm
110 mm
4 µm
2
150 m/s
2
IP50
0
mm
_ 0.013
DK110NLR5