Herunterladen Inhalt Inhalt Diese Seite drucken

Charging The Power Bank - Silvercrest SPS 5000 A1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SPS 5000 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Charging the power bank

Before using the power bank, the integrated battery must be fully
charged.
CAUTION
The power bank must never be charged and used for charging
an external device at the same time.
Due to the high battery capacity and bearing in mind the charging
time, we recommend charging the power bank using the mains
adaptor.
Use only a mains adapter with an output voltage of 5 V and
an output current of at least 1 A or a USB 3.0 port on your
computer to charge the power bank.
You can recognise the USB 3.0 port due to the blue marking.
When charging via a USB port, ensure that at least one further
USB port remains free. This also applies when using USB 3.0
ports.
Not all USB 2.0 ports deliver sufficient power to charge the
power bank. If this is the case, use an external power supply or
a USB 3.0 port.
Connect the USB plug on the charging cable
PC or a USB power supply (not supplied).
Connect the microUSB plug on the charging cable
microUSB charging port
of the charge level is shown during charging by means of the
charge level LEDs
GB │ MT
44 
on the Power Bank. A rough estimate
.
to a switched-on
to the
SPS 5000 A1

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis