Shredding Attachment; Fruit Press Attachment - Bosch SmartPower MFW25-Serie Gebrauchsanleitung

Shredding attachment

For shredding, grating and slicing items
such as cheese, fruit, vegetables, nuts,
almonds, dried bread rolls and other hard
foodstuffs. Not suitable for cutting up
fibrous foods such as celery or leek. Select
the appropriate insert depending on the
type and consistency of the food to be
processed. X "Tips" see page 28
Preparation
W Risk of injury!
Do not reach into the sharp blades and
edges of the shredding, grating and slicing
inserts.
X Fig. G
■ Fit the required insert into the housing.
Note: The insert is automatically locked
when the appliance is switched on.
The shredding attachment is now prepared.
Use
W Risk of injury!
– Do not reach into the feed chute with
your hands.
– Only use the pusher when adding more
food.
Caution!
– The pusher can only be inserted in one
direction.
– Remove hard shells (e.g. on nuts).
– Do not apply great force with the pusher.
X Sequence of figures H
1. Fit the prepared attachment onto the
drive of the base unit, holding it at an
angle.
2. Turn the attachment anticlockwise until
you hear it click into position.
3. Prepare your food. Chop up large parts
beforehand so they fit into the feed
chute without having to press them in.
4. Place a suitable container under the
attachment. Add the prepared food to
the filling tray.
5. Connect the mains plug. Switch on the
appliance.
Shredding attachment
6. Use the pusher to slide the food down
the feed chute, applying light pressure.
The food is now cut up or shredded.
7. Once you have finished, switch off the
appliance and pull out the mains plug.
8. Pull out the pusher.
9. Hold down the release button and
turn the attachment clockwise until it
disengages.
10. Remove the attachment, take it apart
and clean all parts. X "Care and daily
cleaning" see page 26

Fruit press attachment

For squeezing juice out of soft fruits such
as raspberries, currants, strawberries and
tomatoes. This attachment is not suitable
for apples or grapes. The attachment is also
not suitable for hard fruits or vegetables like
carrots and beetroot.
Preparation
Note: selection of the filter insert
determines the content of fruit pulp in the
juice. Do not press fruit whose pips are
similar in diameter to the hole diameter in
the filter insert (e.g. raspberries).
X Fig. I
■ Make sure that the sealing rings are
fitted onto the filter holder and the worm
gear. If not, insert them into the sealing
grooves of these parts.
1. Insert the filter insert into the filter holder
and press it into place.
2. Insert the worm gear into the housing.
3. Insert the filter holder into the housing.
Lug on the filter holder must be situated
in the recess on the housing.
4. Fit the threaded ring onto the housing
and screw tight in the clockwise
direction without using force.
5. Screw pulp nozzle into the filter holder.
6. Place the outlet funnel onto the filter
holder until it audibly clicks into place.
The fruit press attachment is now prepared.
en
25