Changing The Battery - Terraillon MultiThermo 30 Bedienungsanleitung

Notice_Multithermo30
2. Ear reading
Remove the protective cap. The appliance
automatically changes to ear-reading mode.
- Press the temperature reading button "
All screen data will display on screen (fig. 1)
followed by last temperature reading (fig. 2).
- When the beep sounds to let you know the
appliance is ready (fig. 3), press temperature-
reading button and maintain pressure. (fig. 4)
- Insert the probe into the ear canal and wait for
the beep to indicate end of temperature reading.
- Release pressure on button.
- Remove appliance from ear canal. Your
temperature will display on screen.
1
Important: in order to obtain a precise reading,
make sure you position the probe correctly in
the ear canal so that the probe is able to record
heat produced by the tympanum (eardrum). It
may help to pull your ear and turn the probe
slightly inside the ear canal. (When using on
children under the age of 1 year, gently pull the
ear backwards. When using on older children or
adults, pull the ear upwards and backwards at
the same time.).
8/03/06 13:20 Page 9
".
CHANGING
THE BATTERY
Whenever this symbol "
screen, it means the battery is worn. Whenever
the symbol "
appliance starts to beep, it means the battery is
2 3 4
flat and needs changing. Press any button to
stop the beep sound.
battery compartment
- Open the battery compartment by pressing the
open button at the back of the appliance.
- Remove the worn battery.
- Replace the battery with a 3V CR2032 lithium
battery and insert into the specially adapted
compartment. The widest part of the battery
should be on top. The "+" sign should remain
Ear drum
visible when the battery is in place.
- Replace the cover. The appliance is ready for use.
Pinna
(Do not throw away worn batteries. Dispose of
them in specially adapted containers so
that they may be collected and recycled.)
Auditory canal
" appears on the
" appears on the screen and the
Button to open
9