Product Description; Using The Product; Inserting & Changing Batteries - Terraillon Thermo Distance Gebrauchsanweisung

PRODUCT DESCRIPTION

Please refer to the illustrations given at the beginning of the information leaflet.
1 - Infrared measuring lens
2 - Distance monitoring lens
3 - Measurement / temperature
reading button

USING THE PRODUCT

INSERTING & CHANGING BATTERIES
• To insert or change the 2 LR3 batteries (supplied with the thermometer), open the battery
compartment by sliding off its cover, insert the batteries ensuring that the negative and positive
ends are in the right place, and replace the cover before use.
TAKING TEMPERATURE READINGS
Turning the unit on
• Press the ON button to turn on the thermometer.
• The thermometer carries out a self-test. And all screen symbols will
appear for a second (fig. 1).
Mode selection (forehead or object mode)
• The unit is automatically set to work in forehead mode.
• To switch from forehead to object mode, press the MODE button. When you hear a beep,
the mode will change automatically (and vice-versa).
Taking a temperature in forehead mode
(please read the whole paragraph before taking temperature)
• Check that you are currently in forehead mode (cf. "display symbols").
• Press and hold down the measuring button.
• Keep the button held down during the entire measurement process.
• Position the thermometer about 6~8cm from the forehead, until you hear
a series of beeps and see a flashing light (fig. 2).
• The series of beeps and flashing light are intended to show that the thermometer is just the right
distance from the forehead to take an accurate reading.
• Release the measuring button and once you hear the end beep, you can take the
thermometer away.
• This new final beep tells you that the temperature has been taken.
• You may now take the thermometer away from the forehead.
• The temperature is displayed on the LCD screen and automatically memorised.
Taking a temperature in object mode
• To measure the temperature of the surface of an object, a food, a liquid or a room temperature.
• Check that you are currently in object mode (cf. "display symbols").
6
4 - 10-memory recall button
5 - Mode button
6 - LCD screen
7 - LED light
8 - ON/OFF button
9 - Battery compartment cover
Figure 1
Figure 2