Description Of Product - Terraillon MultiThermo 30 Bedienungsanleitung

Notice_Multithermo30
DESCRIPTION
OF PRODUCT
Probe cap
Temperature
reading
button
**For easy removal
of the probe cap, we
recommend you use your
thumb on either side
of the cap to ease off
WHEN USING FOR
THE FIRST TIME
BATTERY SUPPLY
This appliance is sold with one 3V (CR2032)
battery, which is already in the battery
compartment. The appliance is therefore ready
for use. A strip of plastic, which extends
outside the battery compartment serves to stop
polarities coming into contact with each other.
To put the appliance into working mode, pull out
this disposable plastic strip.
TAKING YOUR
TEMPERATURE
With its protective cap in place, the appliance
is in forehead-reading mode. By removing the
protective cap the appliance automatically
changes to ear-reading mode.
8
8/03/06 13:20 Page 8
1. Forehead reading
The cap should be in position on the probe nozzle.
- Press the temperature reading button "
All screen data will display on screen (fig. 1),
Probe
followed by last temperature reading (fig. 2).
- After the beep sound, press temperature
reading button and maintain pressure.
- Place the probe on your temple.
- Slide the probe across your forehead to the
other temple.
- Release pressure on button to stop temperature
taking. You'll hear a beep and your temperature
will come up on the screen (fig. 3).
* This forehead reading is identical to what
it would have been had you had taken your
temperature orally.
Forehead temperature may be affected by
external climatic conditions. If in doubt, do not
hesitate to take your ear temperature.
Battery
compartment
cover
".
3
1 2