steel ADAGIO Gebrauchsanweisung Seite 88

PROGRAMMING THE COOKING DURATION
This function is for programming the cooking duration after which the oven switches off
automatically.
•
•
•
•
PROGRAMMING THE COOKING DURATION AND COOKING END
This function is for programming the oven to switch on at a set time and switch off
automatically after cooking.
Set the required cooking function and temperature using the control knobs.
In addition to the cooking duration, also set the time the oven is to switch on:
•
•
•
•
Fig. 5 shows a programming example: the current time is 7:06 and cooking
is programmed to start at 8.00 and end at 9.00.
At 8:00, the internal segments between 8 and 9 will start to flash, while the
hour hand will remain still.
88
Instructions for the user
Set the required cooking function and temperature using the control
knobs;
press the key to enter the programming menu; the display will light up
as shown in Fig. 3;
use the / keys to set the cooking duration; one press of key
adds one minute cooking time and every twelve minutes one internal
segment illuminates (Fig. 4). After 7 seconds the cooking programme
starts and the symbol
At the end of the set cooking time, an audible alarm sounds for 7
minutes; the symbol
switching the oven off automatically;
press any key to stop the alarm or the
press the key to enter the programming menu; the display will light up as shown in Fig. 3
and the symbol appears;
use the / keys to set the cooking duration; one press of key
cooking time and every twelve minutes one internal segment illuminates (Fig. 4);
press the key again and use the
minus cooking duration = cooking start time), the symbol
After 7 seconds the display shows the current time while the cooking start time and the
cooking duration are shown with the illuminated internal segments, which remain steady
until cooking starts and flash for the duration of the cooking time.
At the set time, the oven switches on automatically; at the end of the set cooking time, an
audible alarm sounds for 7 minutes; the symbols
flash, switching the oven off automatically;
press any key to stop the alarm or the
appears.
and the numbers on the dial start to flash,
key to delete the programme.
/ keys to set the cooking end time (cooking end time
key to delete the programme.
Fig. 3
Fig. 4
adds one minute
appears.
and the numbers on the dial start to
Fig. 5