Degree Of Protection And Type Of Fixation; Mounting Cut-Out - Siemens SIMATIC 6AV7671-1EA Serie Bedienhandbuch

Quick Start
3.2.4.

Degree of protection and type of fixation

Information to degree of protection and type of fixation can be found in chapter
„Application planning" in the manual for the control unit
3.3.

Mounting cut-out

Select and complete recessed mounting cut-out
Range of validity
The computer unit of the Panel PC Remote Kit needs no mounting cut-off.
The following applies to centralized configuration and for the control unit of the Panel PC
Remote Kit.
Requirement
The degree of protection and type of fixation for the application are selected. (According
to the instruction manual Panel PC)
Procedure
1. Please follow the installation guidelines.
2. Select a location suitable for installation, taking into account the installation
guidelines.
3. On the basis of the dimension diagrams, check whether the required screw and
pressure points on the backside and the hatched seal area are easily accessible after
the completion of the installation cut-out. Otherwise the installation cut-out is useless
4. Complete the installation cut-out according to the dimension diagrams in chapter 3.6
„Mounting cut-off" in the manual Panel PC. Please take into account the installation
depth of the control unit and the remote device. The dimensions of the remote device
can be found in chapter 6.5.
Panel PC Remote Kit
A5E00447267V
All manuals and user guides at all-guides.com
08.07
39
Doc.No.:b40013de1.doc