Fixation And Connection Of The Remote Device To The Control Unit; Connection Of The Remote Device With The Control Unit - Siemens SIMATIC 6AV7671-1EA Serie Bedienhandbuch

Quick Start
3.4.

Fixation and connection of the remote device to the control unit

3.4.1.

Connection of the remote device with the control unit

Procedure
1. The ribbon cables and the USB-cable of the control unit are connected with the
remote device. The white plug socket and the USB-socket will be used at the 12"
and 15" control unit. The four cables will be connected to the remote device
accordant to the marking on the cable and the device if a control unit with a SXGA
(1,280 x 1,024) resolution is used.
2. The remote device is fitted on the second side.
3. The remote device is fixed with four screws.
Fig. 9: Remote device and control unit
Fig. 10: Position of the interface for the connection
Panel PC Remote Kit
A5E00447267V
All manuals and user guides at all-guides.com
USB
K1
Fitting clamp of the remote
device
K3
K2
08.07
40
Doc.No.:b40013de1.doc