Assembly Of The Computer Unit - Siemens SIMATIC 6AV7671-1EA Serie Bedienhandbuch

Quick Start
3.5.

Assembly of the computer unit

Note
The port of the LCD interface for the centralized configuration has to be closed before the
computer unit will be assembled. (Interface port see Operating instructions "SIMATIC
Panel PC 677/677B, computer unit" and PC 877 respectively, chapter "Connection
element",). The supplied cover plates will be used for it.
Range of validity
The following is only valid for computer unit in the Panel PC Remote Kit configuration.
The additional information for the centralized configuration can be found in the accordant
chapters in the operator instructions of the computer unit.
Screw on of the wall angle bracket
Included in the delivery of the Panel PC Remote Kit are two wall angle brackets, which
will be fixed on the computer unit with 6 screws M3x6 (see Fig. 5 and Fig. 7).
Instruction for the fixation on the wall and the roof.
Examples for the fixation types
Material
Concrete
Hard plaster board
minimum thickness
13 mm
Metal
minimum thickness
12 mm
Warning
!
Make sure that the wall or roof is able to bear the minimum weight of 3 times the weight
of the unit with the wall angle bracket and the additional devices. The weight can be
found in the chapter "Technical Date" in the Instruction manual of the Panel PC.
Panel PC Remote Kit
A5E00447267V
All manuals and user guides at all-guides.com
Hole diameter
8 mm diameter, 60 mm depth
14 mm diameter
5 mm diameter
08.07
Fixation
Screw anchor: 8 mm, 50 mm
Screw 4 mm, 50 mm
Screw anchor
Diameter 4 mm
Length minimum 50 mm
Metal screws
Diameter 4 mm
Length minimum 15 mm
Doc.No.:b40013de1.doc
42