Electronic Unit - SWISSTHERM VT167 OHE Bedienungs Und Installationsanleitung Handbuch

ELECTRONIC UNIT

ELECTRONIC UNIT:
Display (The Control Panel setup, see control panel drawing on page 4).
Water
Upper line is the text of the displayed function (menu).
45° ° ° ° C
The bottom line shows the menu status or value.
Operating done with rotary-/push button no. 35 on the control panel drawing.
The display is activated (indicated) by turning or pressing the button.
You can change between the 12 menus in the main menu by turning the knob. The far left is the menu "WATER".
If there is a change in the status or value, a short push causes a flashing at the bottom line. Meanwhile the flashing turn
the knob until the desired value appears and then presses the knob for a short time to accept. If no accept received the
setup returns to last option.
If knob pressed for more than 3 seconds will cause a service menu to appear. This is where factory preset values are
displayed.
Any changes in these shall only be conducted in consultation with the installer.
12