GB
For your attention:
- Position the belt locks on a flat surface where they are easily
accessible.
- The belts should not be twisted, damaged or trapped.
- The loose ends of the belt must always be secured.
- To avoid any friction on the car seat, we recommend protecting
critical areas by inserting a layer of soft fabric.
NOTE! THE FASTENING BELTS CANNOT BE USED FOR
HARNESSING THE CHILD !
8
5. Hints on care
Removing the covers for washing:
30°
The cover consists of three parts which are connected to the seat
by means of Velcro strips, buttonholes and straps. Once these
fastenings have been undone, it is easy to remove the three-part
cover. The covers are replaced in the reverse order (sitting area,
backrest, head-rest).
• When washed or in contact with any moisture, the cover fabric
may fade slightly.
Avoid using solvents!
15
9
10