Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
By means of the "Lock" function you
can block the rest of the icons, except
for the general on / off sensor
to prevent undesired operations. This
function is useful as a safety measure
for
children.
Activating the function.
To activate this function touch the
icon, it will light up in red and a
message is displayed to indicate that
the function is active.
Deactivating the function.
Press the
icon again, it lights up
in white and a message is displayed
to indicate that the function is
deactivated.
If you turn off the equipment with the
general on / off sensor
lock is activated, when you turn on
the cooker again the lock function will
remain
active.
Stop&Go function
With this function it is possible to
pause the cooking process. In the
event that the "Timer" function is
active, it will also be paused.
Activating the function.
In order to activate this function touch
the
icon, it will light up in red and
the zones will display the
to indicate that the cooking has
been paused.
Deactivating the function.
Touch the
icon again, it will light up
in white and the cooking will resume
in the same power level and timer
conditions as before the pause.
Power
Function
This function gives the zone "extra"
power, higher than the nominal power.
This power depends on the size of the
zone, and can reach the maximum
value permitted by the generator.
26
1 Slide your finger on the power
ring until going over level 9 or by
touching the fourth quadrant of
(1),
the same; inside the ring the word
"POWER" will be displayed.
2 The word "POWER" will also be
displayed on the zones and the
cooktop will start to supply the extra
power.
The "Power" function has a maximum
d u r a tio n sp e ci fi ed in Ta b le 1
(depending on the model). After this
time, the power level will automatically
revert to level 9. A signal will be heard
and a message will be displayed that
indicates the power adjustment made.
By activating the "Power" function
in a zone, it is possible that the
performance of some of the others
may be affected, reducing their power
to a lower level, and in this case it will
be shown on the zone.
(1) while the
In order to deactivate the "Power"
function before the operation time has
elapsed, choose the zone and slide
your finger on the power ring, choosing
a different level of power.
Timer function
This function will making the cooking
process easier, as it is not necessary
to be present during the same. You
can set a timer for a zone and it will
turn off automatically once the desired
time has elapsed.
In this model you can program each
symbol
one of the zone simultaneously, from
1 to 60 minutes.
Timing a zone.
Once the power for a specific zone
has been determined, you can apply
a timer to it.
1 Touch the 0:00 icon (fig. 5). The
2 Immediately after, slide your finger
Once the time chosen has elapsed,
the timed zone will turn off and will
beep for several seconds, which can
be stopped by touching any part of
the screen. If the zone that has been
turned off is hot, it will display the H
symbol.
If you want to set the timer for another
zone at the same time, you must
repeat steps 1 and 2.
If you want to configure the power
again, press the power level indicated
at the top left of the screen (fig. 6).
Modification of the programmed
time.
If you want to
the preset time is over:
1 Choose the zone.
2 Press the icon 0:00 (fig. 5), and then
Disconnecting the timer.
If you want to stop the timer before the
preset time is
1 Choose the zone.
2 Press the icon 0:00 (fig. 5), and then
Adding a "Sound Alarm".
During the set timer period, you can
add a "Sound Alarm" to remind you of
any changes required while cooking.
fig. 6
1 After choosing the timer period,
power ring changes to blue,
indicating that the function is
available. Inside it, automatically,
a thinner, red circle will appear,
indicating the power chosen
on the blue ring and choose the
cooking time, from 1 to 60 minutes.
modify the timer before
slide your finger on the time ring to
change the timer setting.
over:
slide your finger on the time ring to
reduce the time down to 00:00. The
timer will be cancelled.
press the
icon (fig. 7) which will
light up in blue. When you remove
your finger, the "Add Sound Alarm"
option will scroll up from the bottom.
You can add several sound alarms
for the same zone. The "Sound
(fig.
6).
Werbung
Inhaltsverzeichnis
