Grilling - Silvercrest STGE 2000 A1 Bedienungsanleitung

7) Plug the mains plug into an easily accessible mains socket.
8) Turn the heat level control 6 to MAX and let the appliance heat up for
approx. 5 minutes without food. The operating light 7 lights up to show that
the appliance is heating up. It goes out as soon as the selected temperature
has been reached.
NOTE
► Depending on the room temperature, heating up will start at different
positions on the heat level control 6.
The operating light 7 may come on and go out several times during
►
this process. This is not a malfunction of the appliance! It merely indi-
cates that the appliance is maintaining the set temperature.
► Before first use, allow the appliance to heat up to the maximum
temperature setting for approx. 15 minutes without food. This removes
the protective layer on the heating element. It also means that when the
appliance is heated up for the first time, a small amount of smoke and
smell may be generated. This is normal and is completely harmless.
Ensure that there is adequate ventilation.
The appliance is now ready for use.

Grilling

WARNING!
► To prevent the appliance from overheating, do not place any materials such
as aluminium foil, aluminium trays, plates or the like on the cooking grill 1.
There is a risk of fire!
► As soon as the water level falls below the MIN mark after extended use,
top up the water. There is a risk of fire! Disconnect the power plug from
the mains power socket and carefully fill the water up to the MAX mark.
Do not pour water over the hot heating elements, otherwise they could be
damaged.
► The surfaces of the appliance become very hot during use. During opera-
tion, touch the appliance only on the heat level control 6 or on the side
handles. There is a risk of burns!
1) Proceed as described in the section Setting up.
STGE 2000 A1
GB │ IE │ NI │ CY │
9 ■