Herunterladen Inhalt Inhalt Diese Seite drucken

Operating The Appliance; Function Switch; Temperature Control; Timer - Silvercrest SGB 1200 A1 Bedienungsanleitung

Mini four-gril
Vorschau ausblenden Andere Handbücher für SGB 1200 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating the appliance

Function switch

You can switch on the appliance using the function
switch 4, and can also set three diff erent func-
tions:
Symbol
GB
OFF

Temperature control

Use the temperature control 3 to set the desired
temperature.

Timer

Use the timer 5 to set the cooking time.
Set the timer 5 to the desired cooking time.
Once the set time has elapsed, a beep sounds
and the appliance stops heating.
NOTE
You can also use the timer 5 as a short-period
timer without the heating function.
Set the function switch 4 to
Set the desired time on the timer 5.
The switch of the timer 5 now rotates anticlock-
wise to "OFF". A beep sounds when the set time
has elapsed. The appliance does not heat up.
40
Meaning
"Top heat"
e.g. for grilling
"Bottom heat"
e.g. for baking cakes
"Top & bottom heat"
e.g. for baking pizza
"OFF"
The appliance is switched off .
.
OFF

Grilling and baking

CAUTION! MATERIAL DAMAGE!
Never place any containers or food directly
onto the fl oor of the appliance, the heating
elements or the crumb tray 8.
1) Place the crumb tray 8 in the appliance.
2) Remove the rack 9 and baking tray 0 from
the appliance. If required, cover these with
baking paper or grease the baking tray 0
with fat/oil that is suitable for baking.
NOTE
The oven must be pre-heated appropriate
to each dish. Refer to the guidelines in the
respective recipe. Pre-heating is useful for:
very short baking times,
crisp crusts,
delicate dishes that require a constant
temperature, such as souffl és.
If no pre-heating is required, skip step 3).
3) Allow the appliance to heat up until it reaches
the desired temperature (this takes about
10 minutes, depending on the temperature
setting):
Select the desired temperature using the
temperature control 3.
Then select the required function using the
function switch 4.
Use the timer 5 to set the preheat time
(approx. 10 minutes).
Close the glass door.
SGB 1200 A1

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Ian 108152Ian 108153

Inhaltsverzeichnis