Graf SICKER-BLOC COMPACT 300 Anleitung Seite 22

GRAF Rain Bloc compact 300
Order no. 360050
The points described in these
instructions must be observed
in all cases. Failure to do so
shall invalidate the warranty. For
any additional items purchased
through GRAF, you will receive
separate installation instructions
in the transport packaging.
The components
checked for any damage before
the system is transferred to the
trench. Damaged components
must not be used.
You can download any missing
instructions from www.graf.info
or request them from GRAF di-
rectly.
mail@graf.info
www.graf.info
Instructions for installing the
GRAF Rain Bloc compact 300
Contents
1. GENERAL INFORMATION
1.1 General
1.2 Safety
1.3 Transport and storage
2. TECHNICAL DATA
2.1 Technical data to Rain Bloc compact 300
2.2 Dimensional drawing Rain Bloc compact 300
3. SELECTING THE LOCATION
3.1 Location
must be
3.2 Pre-treatment
3.3 Trench dimensions
4. LOAD CATEGORIES
4.1 Installation under surfaces suitable for pedestrian
loading
4.2 Green spaces above the infiltration system
4.3 Installation under surfaces suitable for vehicle loading
5. INSTALLATION
5.1 Preparing the trench
5.2 Covering with geotextile
5.3 Positioning the infiltration ditch elements
5.4 Fitting the inlet and vent
5.5 Inspection
5.6 Backfilling the infiltration system
6. STRUCTURE AS RETENTION VOLUME / RETENTION
TANK
6.1 Structure of retention volume
6.2 Laying geotextile, film and geotextile
6.3 Structure as retention volume / retention tank
7. INSTALLATION UNDER TRAFFIC AREAS UP TO
HGV60
8. USE OF CONSTRUCTION MACHINERY IN THE
INSTALLATION PHASE
9. OTHER APPLICATIONS
1 /
2
2
2
2
3
3
4
5
5
8
9
0
0
0
0
2
2
2
2
4
5
6
7
7
7
7
8
9
0