What To Do If - RADEMACHER RolloTron Basis DuoFern1200 Original - Betriebs- Und Montageanleitung

i

19. What to do if... ?

Fault
... the RolloTron Basic DuoFern 1200 indicates no
functions?
... the RolloTron Basic DuoFern 1200 no longer
reacts in the morning at the configured
switching time?
... the roller shutters no longer stop at the configured
end points?
... the roller shutters stop as soon as the control
button is released?
... an automated function does not work?
... the RolloTron Basic DuoFern 1200 rotates in the
wrong direction?
... the roller shutters stop suddenly during upward
travel?
Possible cause / solution
Check the power supply incl. connecting cable and plug.
The end points may not be configured. Reconfigure the end points,
see page 76.
The end points may be displaced due to elongation of the belt. Re-
adjust the end points, see page 76.
The end points are not configured. Configure the end points, see
page 76.
The automatic function may not be configured or automatic func-
tions are not activated yet, see page 85.
Possibly the belt is wrapped around the reel incorrectly, see
page 73.
a) The drive may be jammed, for example, due to the roller shutters
freezing up or other obstacles.
b) The roller shutters may not be running sufficiently smoothly.
Check the roller shutters and roller shutter guides.
d) The roller shutters may be too heavy. The maximum tractive force
of the belt winder has been exceeded, see page 94.
EN
91