RADEMACHER RolloTron Basis DuoFern1200 Original - Betriebs- Und Montageanleitung Seite 89

i
17. Removing the RolloTron Basic DuoFern 1200 (e.g. in the event of a move)
8.
Remove the reel compartment cover.
9.
Check the position of the fastening hook.
10.
If necessary, move the fastening hook into an easily
accessible position.
There is a risk of injury from the reel.
◆ Never reach into the reel compartment when the
motor is running.
◆ Always remove the mains plug before touching the
reel compartment.
11.
Finally, remove the mains plug again from the socket.
12.
Release the belt from the fastening hook and pull it
out completely from the front of the RolloTron Basic
DuoFern 1200.
CAUTION!
EN
89