Installing The Rollotron Basic Duofern 1200 - RADEMACHER RolloTron Basis DuoFern1200 Original - Betriebs- Und Montageanleitung

i

11. Installing the RolloTron Basic DuoFern 1200

Mount the RolloTron Basic DuoFern 1200 as straight as
possible, so that the belt can wind correctly.
Ensure that the RolloTron Basic DuoFern 1200 sits freely
in the belt box and that it is not in contact with the ma-
sonry, otherwise this may cause noise during operation.
1.
Slide the RolloTron Basic DuoFern 1200 into the belt box
and screw it tight using the screws provided.
A damaged connecting cable may cause a short
circuit.
Ensure that the connecting cable is laid correctly inside
the cable duct, otherwise it can be crushed and damaged
when the cover is screwed in place.
2.
Re-insert the mains plug into the 230 V / 50 Hz socket.
Leave the bottom cover plate open until all
i
settings have been carried out.
WARNING!
EN
75