Sub-Titles - TechniSat DIGIT MF4-K CC Handbuch

Once you have entered the desired video text page,
the receiver will search for the desired page automati-
cally.
As not all video text pages can be transmitted simulta-
neously, it may take a few seconds for your receiver to
find the correct page, and to display it on the television
screen.
> Use the red resp. green keys to page forward or
backward one page at a time.
> Use the yellow function key to display the video text
group shown in the yellow field.
> Use the blue function key to display the video text
block shown in the blue field.
Mixed operation
> Pressing the Videotext key again will switch to
mixed operation, i.e. both video text and TV picture will
be shown simultaneously on the screen.
> Press this key again to return to normal operation.
Stop paging
> Press the Stop/Freeze frame key,and the upper left
corner of the video text window will display the messa-
ge "Stop". This stops the continued automatic paging
through the video text sub-pages. Press the
Stop/Freeze frame key again to disable the Stop
operation.
> Press the Back key to return to normal operation.

7.14 Sub-titles

Where sub-titles are broadcast, this is indicated by displaying
the message Select Sub-title. If you have enabled the
Sub-title function in accordance with Point 6.3, these will be
automatically displayed, with the provision that they are being
broadcast in the language selected.
If the sub-titles are only being broadcast in other languages,
or are only available via video text, you can switch the display
on manually as follows.
> Press the Option key, if necessary several times,
until the entry Sub-titles is displayed, showing a
selection table of sub-title languages and/or video text
pages carrying sub-titles broadcast.
> Use the arrow keys up/down to mark the desired
language/video text page.
84