Updating Time; Updating; Sfi Channel; Parental Control - TechniSat DIGIT MF4-K CC Handbuch

> In this line, use the arrow keys left/right to select
the form of presentation to be used whenever the
electronic programme guide is called up.
> If you select Genres,you can then proceed to use the
arrow keys to select your preferred genre (e.g.
movies, news, shows, sport, etc.).

8.2.3 Updating time

> In the line Updating time use the numeric keys
to set the time at which the automatic download of SFI
data is to be carried out.

8.2.4 Updating

> To receive the data channel, mark the line Update.
> Set this to On by pressing OK.
If you do not wish to receive the additional data, or if you are
unable to receive the data because of your location, you can
switch off the data reception function:
> Set the line Update to Off in order to switch off the
data reception function.

8.2.5 SFI channel

> Press the OK key to display the sub-menu SFI
Channel (Fig. 8-9).
> To start the updating of SFI data manually, press the
red function key Start now.
If the parameters applicable to the data channel used to
download the SFI list have changed, you can use this menu
to correct the parameters. The current transponder data is
available from specialist retailers. Generally, though, you
should not make any changes in this menu.

8.3 Parental control

Your receiver is equipped with a parental control function.
This allows you to protect important functions (e.g. calling up
the main menu) from unauthorised access. In addition, pro-
grammes and recordings that you have blocked can in future
only be selected by first entering a four-digit PIN code (unit
PIN).
To work on the Parental control menu, proceed as fol-
lows:
> Press the Menu key to call up the Main Menu.
> Use the arrow keys up/down to mark the line
Settings.
101
(Fig. 8-9)