TechniSat DIGIT MF4-K CC Handbuch Seite 105

> Use the arrow keys up/down to select the type of
scan youi wish to perform.
> Confirm by pressing OK.
> Use the arrow keys up/down to mark the fields
Start channel resp. Start frequency (only in the
case of a frequency or channel scan). Please note
that the figure given for the start channel resp. the
start frequency must be lower than that for the stop
channel resp. stop frequency.
> Use the arrow keys left/right to select the start
channel, or use the numeric keys to enter the start
frequency (only in the case of a frequency or channel
scan).
> Use the arrow keys up/down to mark the field
Stop channel resp. Stop frequency and proceed
as described above to enter the stop channel resp.
the stop frequency (only in the case of a frequency or
channel scan).
Below the line Symbol rates you will see a list of the sym-
bol rates which are covered when a scan is carried out. In
order to include additional symbol rates in a scan, you can
adjust the list as follows:
> To add new symbol rates, use the arrow keys
up/down to select the line Symbol rates New
and confirm by pressing OK (only in the case of a fre-
quency or channel scan).
> Now use the numeric keys to enter a new symbol-
rate, and confirm this by pressing OK (only in the
case of a frequency or channel scan).
The new symbol rate entered will be added at the end
of the list.
> To delete the symbol rate shown at the end of the list,
use the arrow keys up/down to select the line
Delete then press OK (only in the case of a frequen-
cy or channel scan).
In the line Scan mode you can decide whether you
wish to scan only for unencrypted programmes, or
whether you want to include encrypted programmes
as well.
> To do this, use the arrow keys up/down to mark
the line Scan mode, then press OK to decide whet-
her you wish to scan only for unencrypted program-
mes (Only free) or whether you also wish to scan for
encrypted programmes (All).
> Press the red function key Start scan to start the
programme scan. The scan will commence. Please
note any additional messages displayed on the screen.
105