Sfi Programme Overview - TechniSat DIGIT MF4-K CC Handbuch

> Press the red function key Timer to open a selection
window.
> Use the arrow keys up/down to mark the line
Delete Timer.
> Confirm by pressing OK.
> To abort an active timer, switch off the digital receiver
using the On/Standby key.
> Press the same key again to switch the receiver on
again, and full functionality will be restored.

7.15.7.3 SFI programme overview

Use the SFI programme overview to display a table with the
day's programmes of a single channel. To do this, proceed as
follows:
> Press the SFI key.
The SFI table "Now" will be displayed.
> Press the blue function key SFI Menu to open a
selection window.
> Use the arrow keys up/down to mark the line
Programmes.
> Confirm by pressing OK. The day's overview of the
programme selected will be displayed. (Fig. 7-19)
> Use the arrow keys to move the marker to the des-
ired programme or time.
The individual days of the week will be shown along
the lower edge of the screen.
If information is available for the following days, the
appropriate fields will be marked.
> To display the programme contents for a specific day,
use the numeric keys to enter the number for the
appropriate day.
Display SFI overview for other programmes
> Press the green function key Programmes.
A list of SFI programmes will be displayed.
(Fig. 7-20)
> You can now use the arrow keys to mark the des-
ired programme.
> Press the OK key to display the SFI overview of the
programme selected.
89
(Fig. 7-19)
(Fig. 7-20)