Picture Format; Language (Audio Signal); Language (Sub-Titles); Tv Scart Mode - TechniSat DIGIT MF4-K CC Handbuch

> Confirm by pressing OK.
The sub-menu Settings will be displayed. (Fig. 6-4)
> Now use the arrow keys up/down to mark the line
Audio/Video Settings.
> Confirm by pressing OK. The menu Audio/Video
Settings will be displayed. (Fig. 6-5)
> Use the arrow keys up/down to move the marker
within the menu, and to change the individual items as
indicated. When selecting a menu item, please note
any messages displayed on screen. The following set-
tings may be made:

6.3.1 Picture format

> Use the arrow keys left/right to set the picture
format appropriate for your TV set: 4:3 or 16:9. This
function provides the automatic adjustment of the pic-
ture format for your television set.

6.3.2 Language (Audio signal)

> Use the arrow keys left/right to select your pre-
ferred language in this line. This function will automati-
cally select the preferred language, where available,
following a scan.

6.3.3 Language (Sub-titles)

Your DVB receiver is equipped to display sub-titles. If the
sub-title function is activated, and the language selected is
being broadcast, these will be displayed automatically.
If the function is not activated, sub-titles can be switched on
manually. The availability of sub-titles is indicated by display
of the message Sub-title selection. Please also note
Point 7.13 of the operating manual.

6.3.4 TV SCART mode

In this line, use the arrow keys left/right to set the para-
meter according to your TV set, to FBAS, RGB or S-Video.
For standard sets, select FBAS.

6.3.5 VCR SCART mode

In this line, use the arrow keys left/right to select the
parameter according to your TV set: FBAS or
S-Video. For standard sets, select FBAS.
75
(Fig. 6-4)
(Fig. 6-5)