Tv/Radio Switching; Selecting A Different Language (Tv Mode) Resp. Station (Radio Mode); Dolby Digital (Ac3 Mode) - TechniSat DIGIT MF4-K CC Handbuch

7.5 TV/Radio switching

The pre-programmed settings include both radio and TV pro-
grammes.
> Press the TV/Radio key to switch the digital receiver
to radio mode. The receiver will now switch to the
radio programme last selected.
> Press the TV/Radio key again to revert to the TV
programme last selected.
7.6 Selecting a different language (TV mode)
resp. station (Radio mode)
If a programme is broadcast in several languages, or with
multi-channel sound, or if several radio programmes are
available on a specific radio slot, this information will be
displayed (Fig. 7-10) on screen. You may then proceed as
follows to select a different language or a different sound
channel:
> Press the Option key. A list will now be displayed
(Fig. 7-11) on screen, indicating the languages resp.
radio programmes currently available.
> Use the arrow keys up/down to mark the desired
language, resp. the desired radio programme, and
confirm by pressing OK.
You may now listen to the programme in the
language selected. Your digital receiver is also
equipped to receive monaural programmes.
> Use the arrow keys left/right to choose between
Mono channel 1 (
Stereo ( ).

7.6.1 Dolby Digital (AC3 mode)

Where a programme is broadcast with Dolby Digital sound,
this will be indicated by the Dolby logo in the information box
when you switch to the programme. If you have switched on
the Dolby Digital (AC3) function in accordance with Point
6.3.6, this programme will then automatically be reproduced
in this format.
If you have not enabled the Dolby Digital (AC3) function,
you can switch to AC3 mode manually as follows:
> Press the Option key. Where available, a list of the
currently available languages and Dolby Digital
(AC 3) will be displayed on screen.
> Use the arrow keys up/down to mark the line
Dolby Digital.
), Mono channel 2 (
81
) and
(Fig. 7-10)
(Fig. 7-11)