Disposal; Disassembly; Environment And Recycling - clage MBH 3 Gebrauchs- Und Montageanleitung

MBH 3..7

Disposal

5. Disposal

5.1 Disassembly

EN
1. Switch off the power supply to the instantaneous water heater.
2. Close the shut-off valve in the inlet pipe.
3. Disconnect the electrical connection in the appliance junction box or disconnect the protec-
tive earth plug if the appliance is fitted with a plug.
4. Disconnect the water pipes from the connectors of the appliance. This can cause water leak-
age.
5. Remove the appliance from the wall bracket. To do so, insert the tip of a wide screwdriver
as far as it will go into the latch between the water connection pieces and push the latch
slightly upwards. Tilt the appliance forward by max. 15° and remove it by lifting it upwards.
6. Unscrew the wall bracket from the wall.
Fig. 15: "Removing the appliance from the wall bracket"

5.2 Environment and recycling

Your product was manufactured from high-quality, reusable materials and components.
Please respect in case of discarding that electrical devices should be disposed of separately
from household waste at the end of their service life. Therefore, please take this device to a
municipal collection point that accepts electronic scrap. Disposing it correctly will support envi-
ronmental protection and will prevent any potential negative effects on human beings and the
environment that could arise from inappropriate handling of these devices at the end of their
service life. Please contact your local authority for further details of your nearest designated
collection point or recycling site.
Business customers: If you wish to discard equipment, please contact your dealer or supplier
for further information.
32