How To Use By Remote I/O; How To Use In Serial Mode - Agilent Technologies Turbo-V 81-AG Bedienungshandbuch

How to Use by Remote I/O

How to Use in Serial Mode

Ready to operate by SERIAL connections.
Turbo-V 81-AG Rack Controller User Manual / 87-900-986-01
1
Power ON the controller.
2
Press the "COUNTERS" and "MEASURES" button toghether.
3
Select MODE = REMOTE from the "INPUT/OUTPUT" menu.
4
Exit from configuration menu.
1
Power on the controller.
2
Connect the serial cable.
3
Select by front panel if you want to work in 232 or 485, and if
necessary, the serial address.
4
Select SERIAL from the INPUT/OUTPUT menu.
5
Open the T+ software (see orderable parts table).
Technical Information
How to Use by Remote I/O
(I)
17
277/306