Setting And Starting A Programme - Electrolux WAGL3E200 Benutzerhandbuch

16 www.electrolux.com
3. To use powder detergent, turn the
flap up.
4. To use liquid detergent, turn the flap
down.

11. SETTING AND STARTING A PROGRAMME

11.1 Setting and starting a
programme
1. Turn the programme knob. The rela-
ted programme indicator comes on.
2.
The indicator of button
with red colour.
3. The display shows the default tem-
perature and spin speed. To change
the temperature and/or the spin
speed, press the related buttons.
4.
Set the available functions. The indi-
cator of the set function comes on or
the display shows the related symbol.
5.
Press button
gramme. The indicator of button
is on.
The drain pump can operate for a
short time when the appliance fills
water.
flashes
4
4 to start the pro-
4
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent dispens-
er. Make sure that the flap does not
cause a blockage when you close the
drawer.
With the flap in the position
DOWN:
– Do not use gelatinous or thick
liquid detergents.
– Do not put more liquid deter-
gent than the limit showed in
the flap.
– Do not set the prewash phase.
– Do not set the delay start func-
tion.
11.2 Interrupt a programme
1.
Press button 4
es.
2.
Press button 4
programme continues.
11.3 Cancel a programme
1.
Press button
1
gramme and to deactivate the appli-
ance.
2.
Press button 1
appliance. Now, you can set a new
washing programme.
The appliance does not drain the
water.
11.4 Change a function
You can change only some functions be-
fore they operate.
. The indicator flash-
again. The washing
to cancel the pro-
again to activate the