Setting And Starting A Programme - Electrolux WA 1457 F Benutzerinformation

12 electrolux
Always obey the instructions that you find on the packaging of the detergent products.
Check the position of the flap
1. Pull out the detergent dispenser until it
stops.
2. Press the lever down to remove the
dispenser.
3. To use powder detergent, turn the flap
up.

SETTING AND STARTING A PROGRAMME

1. Turn the programme knob. The related
programme indicator comes on.
2. The indicator of button
red colour.
3. The display shows the default tempera-
ture and spin speed. To change the
temperature and/or the spin speed,
press the related buttons.
4. Set the available functions. The indica-
tor of the set function comes on or the
display shows the related symbol.
5. Press button
gramme. The indicator of button
on.
Downloaded from www.Manualslib.com
Flap for powder or liquid detergent
Turn it (up or down) in the correct position to use powder or liquid detergent.
4
flashes with
4 to start the pro-
manuals search engine
4. To use liquid detergent, turn the flap
down.
5. Measure out the detergent and the fab-
ric conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause
a blockage when you close the drawer.
With the flap in the position DOWN:
– Do not use gelatinous or thick liquid
detergents.
– Do not put more liquid detergent
than the limit showed in the flap.
– Do not set the prewash phase.
– Do not set the delay start function.
INTERRUPT A PROGRAMME
1. Press button
2. Press button
programme continues.
CANCEL A PROGRAMME
1. Press button
gramme and to deactivate the appli-
ance.
2. Press button
appliance. Now, you can set a new
washing programme.
4
is
The appliance does not drain the wa-
ter.
4
. The indicator flashes.
4
again. The washing
1
to cancel the pro-
1
again to activate the