Herunterladen Inhalt Inhalt Diese Seite drucken

Open The Door; At The End Of The Programme - Electrolux WAGL3E200 Benutzerhandbuch

Washing machine
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1.
Press button
es.
2.
Change the function set.
11.5 Set the delay start
1.
Press button
the display shows the number of mi-
nutes or hours. The related symbols
comes on.
2.
Press button
the countdown of the delay start.
When the countdown is completed,
the programme starts automatically.
Before you press button
start the appliance, you can can-
cel or change the set of the delay
start.
You cannot set the delay start
with the Steam programme.
11.6 Cancel the delay start
1.
Press button
tor flashes.
2.
Press button
the display shows 0'.
3.
Press button
starts.

12. AT THE END OF THE PROGRAMME

12.1 At the end of the
programme
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
• The indicator of the Start/Pause button
4
goes off.
• The door lock symbol goes off.
• Press button
pliance. After five minutes from the end
of the programme, the energy saving
function automatically deactivates the
appliance.
4
. The indicator flash-
5
again and again until
4
, the appliance starts
to
4
4
. The related indica-
again and again until
5
. The programme
4
comes on.
1
to deactivate the ap-

11.7 Open the door

While a programme or the delay start op-
erates, the appliance door is locked.
To open the appliance door:
1.
Press button
4
bol in the display goes off.
2.
Open the appliance door.
3.
Close the appliance door and press
button
. The programme or the
4
delay start continues.
If the temperature and level of the
water in the drum are too high,
the door lock symbol stays on and
you cannot open the door. To
open the door do the steps that
follow:
1.
Deactivate the appliance.
2.
Wait for some minutes.
3.
Make sure that no water is in
the drum.
If you deactivate the appliance, it
is necessary to set the pro-
gramme again.
When you activate the appliance
again, the display show the end of
the last set programme. Turn the
programme knob to set a new cy-
cle.
• Remove the laundry from the appliance.
Make sure that the drum is empty.
• Keep the door ajar, to prevent mildew
and odours.
• Close the water tap.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent the
creases in the laundry.
– The door stays locked.
ENGLISH
17
. The door lock sym-

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis