Installation; Unpacking - Electrolux WAGL3E200 Benutzerhandbuch

16. INSTALLATION

16.1 Fixing plate kit
(4055171146)
Available from your authorized dealer.
If you install the appliance on a plinth, se-
cure the appliance in the fixing plates.
Follow the instructions supplied with the
kit.

16.2 Unpacking

1. Use the gloves. Remove the external
film. If necessary, use a cutter.
2.
Remove the cardboard top.
3. Remove the polystyrene packaging
materials.
4. Remove the internal film.
5. Open the door. Remove the polystyr-
ene piece from the door seal and all
the items from the drum.
6. Put one of the polystyrene packaging
elements on the floor behind the ap-
pliance. Carefully put down the appli-
ance with the rear side on it. Make
sure not to damage the hoses.
7. Remove the polystyrene protection
from the bottom.
8. Pull up the appliance in vertical posi-
tion.
9. Remove the power supply cable and
the drain hose from the hose holders.
ENGLISH 25
1
2