Before First Use; Using The Appliance; Activating The Appliance And Setting A Programme; Loading The Laundry - Electrolux WASL2E 200 Benutzerinformation

BEFORE FIRST USE

1. To activate the drain system, put 2 litre
of water in the main wash compartment
of the detergent dispenser.

USING THE APPLIANCE

1. Open the water tap.

ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME

For a correct operation of the weight sensor, activate the appliance and set the programme
BEFORE you put the laundry in the drum.
1. Press button
1
ance.
2. Turn programme knob
essary programme. The programme in-
dicator comes on.
3. The indicator of button
red colour.
4. The display shows the default tempera-
ture and spin and the empty indicator
bars of the available functions.

LOADING THE LAUNDRY

1. Open the appliance door.
2. The display (J) shows the maximum
load for the programme (MAX) and the
weight of the laundry (KG).
3. Put the laundry in the drum, one item at
time. Shake the items before you put
them in the drum.
to activate the appli-
2
to the nec-
4
flashes with
2. Put a small quantity of detergent in the
main wash compartment of the deter-
gent dispenser. Set and start a pro-
gramme for cotton at the highest tem-
perature without laundry. This removes
all possible dirt from the drum and the
tub.
2. Connect the mains plug to the mains
socket.
5. If it is necessary, press button
9
button to change the water temper-
ature and the spin speed.
6. If necessary, press the related buttons
to add some functions or to set a de-
layed start. The display shows the sym-
bol of the set function and the digit (I)
shows the delayed time.
4. On the display the weight of the laundry
updates by steps of kg 0.5. The weight
is indicative and changes with the type
of the laundry.
If you put in the drum more laundry
than the maximum load, the symbols
MAX and the value 0.0 start to flash.
You can wash your laundry but the wa-
ter and energy consumption increase.
To have the best consumption and
washing performance remove some
items until the symbols stop to flash.
The overload indication is available only
for programmes with a maximum load
lower than the appliance maximum
load.
electrolux 41
10
and