Setting A Programme - Electrolux EWF 1484 EDW Benutzerinformation

14 www.electrolux.com
3.
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.

10.5 Setting a programme

1. Turn the programme knob and set the
2. If necessary, change the temperature
10.6 Starting a programme
without the delay start
Press
Downloaded from www.Manualslib.com
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the prewash phase.
• Do not set the delay start.
programme:
• The indicator flashes.
• The display shows the level of the
Time Manager, the programme
duration and the indicators of the
phases of the programme.
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
If you set something
incorrect, the display shows
the message
.
• The indicator of stops to flash
and stays on.
• The indicator starts to flash on
the display.
• The programme starts, the door
locks, the display shows the
indicator .
manuals search engine
B
4.
• The drain pump can operate for a
10.7 Starting a programme with
the delay start
.
1. Press
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press
• The appliance starts the
• When the countdown is
short time when the appliance fills
water.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
again and again until the
:
countdown.
completed, the programme starts
automatically.