Positioning And Levelling - Electrolux WAGL3E200 Benutzerhandbuch

26 www.electrolux.com
10. Remove the three bolts. Use the key
supplied with the appliance.
11. Pull out the plastic spacers.
12. Put the plastic caps in the holes. You
can find these caps in the user man-
ual bag.
WARNING!
Remove all the packaging and the
transit bolts before you install the
appliance.
We recommend that you keep the
packaging and the transit bolts for
when you move the appliance.

16.3 Positioning and levelling

• Install the appliance on a flat hard floor.
• Make sure that carpets do not stop the
air circulation below the appliance.
• Make sure that the appliance does not
touch the wall or other units
• Loosen or tighten the feet to adjust the
level. A correct adjustment of the appli-
ance level prevents the vibration, noise
and the movement of the appliance
when in operation.
• The appliance must be level and stable.
CAUTION!
Do not put cardboard, wood or
equivalent materials below the ap-
pliance feet to adjust the level.
16.4 The inlet hose
• Connect the hose to the appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.
x4