Milk- And Coffee-Based Preparations; Brewing A Milk-Based Product - Saeco HD8919 Bedienungsanleitung

MAX
MAX
6.3

Milk- and coffee-based preparations

6.3.1

Brewing a milk-based product

10
ENGLISH
>
Press and rotate the carafe downwards to lock it to the drip tray.
Do not force the carafe in.
Start up phase
> Pull out the milk frother dispensing spout to the dispensing spout open symbol.
If the milk dispensing spout is not taken out completely, it is possible that the milk will
not be frothed correctly.
Proceed by following the instructions on cleaning or on the desired coffee- or milk-
based preparation.
Removing phase
When finished, slide the dispensing spout to bring it back to the dispensing spout
>
closed symbol.
>
Rotate the carafe upwards until it disengages from the drip tray.
>
Then remove it.
Emptying phase
Perform the operations described in the "6.2 Milk carafe" chapter, "Disassembly phase".
>
Empty the milk carafe and clean it appropriately as described in the "7.4.5 Milk carafe
cleaning cycle" chapter.
To prepare a good cappuccino, use cold milk (~5°C / 41°F) with a protein content
of at least 3%. It is possible to use whole and skimmed milk, soy milk and lactose free
milk, according to personal taste.
>
Fill the milk carafe following the instructions of the "6.2 Milk carafe" chapter until "Start
up phase" is done.
The quantity of brewed product in the cup is set by default. To change this value refer
to the "6.3.2 Adjustment of milk/coffee length in the cup during preparation" chapter.
Proceed by following the further instructions on the preparation of the desired
specialty.
When finished, proceed as described in the "6.2 Milk carafe" chapter, "Removing
phase" and "Emptying phase".
> Place a cup under the milk frother dispensing spout.
Burning hazard! At the beginning of each product brewing, milk or steam sprays might
be present.
The carafe must be installed and the milk frother dispensing spout open.
One cappuccino / latte macchiato
> To brew one cappuccino, press the CAPPUCCINO button.
>
Otherwise, to brew one latte macchiato, press the LATTE MACCHIATO button.
The machine displays the necessary sequence of operations: carafe insertion, milk
frother dispensing spout extraction. Wait for the necessary pre-heating time.
The machine dispenses a preset quantity of frothed milk to the cup.
>
To stop dispensing, press the OK button.
The machine brews a preset quantity of coffee to the cup.
>
To stop brewing, press the OK button. After the product has been brewed, the
machine allows for a quick cleaning of the carafe ducts. Please refer to the "7.4.1 Quick
milk carafe ducts rinse cycle" chapter.