Herunterladen Inhalt Inhalt Diese Seite drucken

Containers Cleaning; Cleaning Of The Water Tank; Monthly Cleaning Of The Coffee Compartments; Milk Carafe Cleaning - Saeco HD8919 Bedienungsanleitung

Incanto
Vorschau ausblenden Andere Handbücher für HD8919:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7.3

Containers cleaning

7.3.1

Cleaning of the water tank

7.3.2

Monthly cleaning of the coffee compartments

7.4

Milk carafe cleaning

7.4.1

Quick milk carafe ducts rinse cycle

CLEAN
10
7.4.2

Daily cleaning of the milk carafe

1
2
7.4.3
Weekly cleaning of the milk carafe components
1
2
3
>
Remove the water filter from the tank and wash it with fresh water.
>
Restore the water filter to its seat, pressing lightly and with a slight rotation.
>
Fill the water tank with fresh water.
Once a month, empty and clean the coffee bean hopper with a wet cloth.
>
>
Fill it again with the coffee beans.
After one or more milk-based products have been prepared, the machine allows for a
quick cleaning of the carafe ducts. The CLEAN symbol is displayed.
If you decide to start the cycle, perform the next phase. The machine automatically
exits the function if no button is pressed for 10 seconds.
Ducts rinse cycle phase
>
When the CLEAN symbol is displayed, press OK button.
>
Pull out the milk carafe dispensing spout as detailed in the "6.2 Milk carafe" chapter,
"Start up phase".
>
Place a container under the dispensing spout.
>
Press the OK button to start dispensing hot water.
Burning hazard! At the beginning of each product brewing, milk or steam sprays might
be present. Wait until the end of the cycle before removing the milk carafe.
>
Remove and empty the container with dispensed water.
It is important to clean the milk carafe every day, in order to promote hygiene and
guarantee the perfect thickness of the frothed milk.
>
At least once a day, perform the "7.4.1 Quick milk carafe ducts rinse cycle" chapter.
>
Disassemble the top of the carafe as shown in the "6.2 Milk carafe" chapter,
"Disassembly phase".
>
Remove the milk carafe lid.
>
Lift the milk frother dispensing spout (1) to extract it from the top of the carafe.
>
Remove the suction tube (2) from the dispensing spout (1).
>
Clean the suction tube (2) thoroughly with lukewarm water.
Disassemble the top of the carafe as shown in the "6.2 Milk carafe" chapter,
>
"Disassembly phase".
>
Remove the milk carafe lid.
>
Lift the milk frother dispensing spout to extract it from the top of the carafe.
The dispensing spout must be closed.
Milk frother dispensing spout disassembly phase
The milk frother dispensing spout comprises five parts that must be disassembled:
1. Dispensing spout lid
2. Suction tube
3. Rubber support
4. Milk frother
5. Milk frother connection
>
To disengage the dispensing spout lid (1):
• Turn the lid (1) from top to bottom
• Hold the lid (1) firmly in one hand.
15
ENGLISH

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis