Descaling Cycle - Saeco HD8919 Bedienungsanleitung

7.5

Descaling cycle

START
CALC
CLEAN START
CALC
CLEAN
START
CALC
CLEAN
START
CALC
CLEAN
CALC
CLEAN
>
Repeat the "Dispensing phase" until the carafe is completely empty.
>
Remove the carafe as shown in the "6.2 Milk carafe" chapter, "Removing phase".
When the CALC CLEAN symbol is displayed, it is necessary to descale the machine.
If this is not done, the machine may stop working correctly: in this case, repairs are
NOT covered by the warranty.
The descaling cycle has a duration of roughly 30 minutes. It consists of a proper
cleaning cycle, with the Saeco descaling product, followed by a rinse cycle.
Do not remove the brew group during the descaling process.
Do not drink the descaling solution or the products resulting from the descaling cycle.
Use exclusively the Saeco descaling solution. The use of other products may damage
the machine and leave residue in the water. The Saeco descaling solution is sold
separately. For further details please refer to the "10.1 Maintenance products" chapter.
Preparation phase
Press the side buttons.
>
>
Remove the drip tray.
>
Remove the coffee grounds drawer and empty it.
>
Empty and wash the drip tray.
>
Restore all the components.
>
Fill the milk carafe following the instructions of the "6.2 Milk carafe" chapter until "Start
up phase" is done, taking into account that the carafe should be filled with water, not
milk, to the MIN level.
>
Place a large container (1.5 l) under the dispensing spout.
Descaling phase
If the AquaClean water filter is present, extract the filter from the water tank and leave
the original small white filter.
>
Pour all the descaling solution in the water tank.
>
Then fill the tank with fresh water to the CALC CLEAN level.
>
Put the water tank back in the machine.
Press the MENU button, confirm by pressing the OK button and scroll the menu to
>
go to the descaling function.
>
Press the OK button to select the descaling function.
The machine displays the necessary sequence of operations: carafe insertion, milk
frother dispensing spout extraction.
Press the OK button to launch the descaling cycle. The machine starts dispensing the
>
descaling solution at intervals. The bar shows the cycle progress status.
The cycle can be paused by pressing the ESC button and restarted by pressing the OK
button. This makes it possible for the user to empty the container or leave for a while.
Let the water be discharged until the tank is empty.
Remove the water tank and rinse it.
>
>
Fill it with fresh water to the MAX level and return it to its proper place.
>
Remove and empty the container.
>
Remove the milk carafe as shown in the "6.2 Milk carafe" chapter, "Removing phase"
and empty it.
Repeat the entire sequence of operations described in the "Preparation phase" above
and proceed with the "Rinsing phase".
17
ENGLISH