Brewing Milk-Based Coffee Beverages And Milk Froth - Saeco PicoBaristo HD8927 Bedienungsanleitung

English
20
1
1
2
1 If the hot water dispensing spout is installed, press the release buttons on
both sides of the hot water dispensing spout (1) and remove it (2).
2 Remove the milk carafe lid.
3 Fill the milk carafe with milk between the MIN and MAX level indications.
Note: Use cold milk (at a temperature of approximately 5°C/41°F) with a protein
content of at least 3% to ensure an optimal frothing result. You can use whole milk
or semi-skimmed milk. It is also possible to use skimmed milk, soy milk and lactose-
free milk.
4 Slightly tilt the milk carafe and insert it into the guides of the machine. Then
push the bottom of the carafe towards the machine until it locks onto the
drip tray.
5 Pull out the milk froth dispensing spout completely to the right to froth
dispensing position.
Note: If the milk froth dispensing spout is not pulled out fully, the milk carafe does
not froth milk properly.

Brewing milk-based coffee beverages and milk froth

1 Place a cup under the open milk froth dispensing spout.
2 Choose your milk-based beverage.
- Press the CAPPUCCINO button to brew a cappuccino.
- Press the LATTE MACCHIATO button to brew a latte macchiato.
- Press the MENU/SPECIAL DRINKS button, choose 'Drinks' and scroll
through the drinks to select one of the special milk-based beverages. You
can choose flat white, baby cappuccino and milk froth. You can find more
details in chapter 'Special drinks'.
3 The machine first dispenses a preset quantity of frothed milk into the cup or
glass and then dispenses a preset quantity of coffee.
- To stop dispensing milk or coffee, press the OK button or the button of
the selected beverage.