Checking The Battery Status; Charging Mobile Devices With The Power Bank - Silvercrest SLIM SPUP 3 B2 Bedienungs- Und Sicherheitshinweise

Checking the battery status

You can check the battery status on the LED indicator
anytime.
Lightly press the ON / OFF switch
shows the current battery status of the power bank
approx. 30 seconds in terms of 4 LED indicators
show overall power bank
1 LED light up = 25 %
2 LEDs light up = 50 %
3 LEDs light up = 75 %
4 LEDs light up = 100 %
Note: This is approx percentage of power bank capacity
but not actual measurement.
Charging mobile devices with
the power bank
You can charge up to two devices at the same time using the
power bank
1
sum of the output current may not exceed 3.0 A.
Connect the USB type A to micro USB cable
original charging cable of the device to be charged to the
USB Type A output
Then connect the micro USB port of the USB type A to
Micro USB cable
to be charged. The charging process will start automati-
cally.
. If all outputs are used at the same time, the
.
2
to the micro USB input of the device
7
. The LED indicator
6
capacity.
1
5
5
for
1
to
5
or the
7
GB/IE 31