Connecting A Personal Computer; Displaying An Image From A Personal Computer; Computer Compatibility Chart; Connecting An Amplifier/Av Receiver - Pioneer PDP-LX608D Bedienungsanleitung

Using with other equipment

Connecting a personal computer

Use the PC terminals to connect a personal computer.
Note
• The PC input terminals are DDC2B-compatible.
Rear view
Stereo
mini jack cable

Displaying an image from a personal computer

To watch an image coming from the personal computer, press PC
on the remote control unit or press INPUT on the plasma television
to select "PC".
When connecting to a personal computer, the correct input signal
type is automatically detected. If the personal computer image does
not come in clearly, you may need to use Auto Setup menu. See
page 52.
Note
• The PC terminals cannot be used for audiovisual equipment.

Computer compatibility chart

Resolution
720 x 400
640 x 480 (VGA)
800 x 600 (SVGA)
1280 x 720
1024 x 768 (XGA)
1360 x 768 (Wide-XGA)
1280 x 1024 (SXGA)

Connecting an amplifier/AV receiver

You can enjoy more powerful sound by connecting such audio
equipment as an amplifier/AV receiver or subwoofer to the plasma
television.
RGB cable
Personal computer
• For details, refer to the operation manual for the audio
• Audio signals synchronizing with currently displayed images
• The audio accompanying images shown on the display is
• When signals are input from the HDMI terminals, no signals are
• While in DTV mode, no signals are output if they are copy
Rear view
This connection is not
required when connecting
an AV amp equipped with
the surround function to a
subwoofer.
Subwoofer
Note
equipment to be connected.
are always output to the AUDIO OUT terminals.
always output to the SUBWOOFER output terminal.
output from the DIGITAL OUT terminal.
guarded.
Frequency
70 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
Stereo audio cable
Optical digital cable
AV receiver
12
61
En