Silvercrest SPBL 6000 A1 Bedienungs- Und Sicherheitshinweise Seite 35

A connected device is not being charged.
The battery is drained.
Charge the battery.
The device is not connected.
Check that it is connected. Lightly press the
ON switch to begin the charging process.
2
The current consumption of the connected
device might be too low.
Check with your connected device manual and
see if your connected device current consumption
comply with this product.
The power bank does not react
1
when the button is pressed or when a
device is connected, even though the
battery is charged.
The power consumption of the connected devices
is too high. Therefore, the internal overcurrent
protection device was activated.
Disconnect the device you would like to charge
from the powerbank and use an appropiate
charging device for charging.
GB/IE 35