Designated Use; Obligations Of The Operator; Personal Protective Equipment (Ppe) - Abicor Binzel CAT3Pro Serie Betriebsanleitung

CAT3Pro
2 Safety
Please observe the attached "Safety Instructions" document.

2.1 Designated use

• The device described in these instructions may be used only for the purpose and in the
manner described in these instructions. When doing so, please observe the operating,
maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorized modifications or changes to enhance the performance are not permitted.

2.2 Obligations of the operator

Ensure that only qualified personnel are permitted to perform work on the device or system.
• Authorized personnel are:
• those who are familiar with the basic regulations on occupational safety and accident
prevention;
• those who have been instructed on how to handle the device;
• those who have read and understood these operating instructions;
• who have read and understand the attached "Safety instructions" document;
• those who have been trained accordingly;
• those who are able to recognize possible risks because of their special training,
knowledge, and experience.
• Keep other people out of the work area.
• Please observe the occupational health and safety regulations of the relevant country.
• Observe the regulations on occupational safety and accident prevention.
• According to DIN EN 60974-10, this device is considered class A welding equipment.
Class A welding equipment is not intended for use in residential areas with a public low-
voltage power supply system. Such use can cause electromagnetic interferences that may
result in equipment damage and malfunctions. Use the device only in industrial areas.

2.3 Personal protective equipment (PPE)

To prevent danger to the user, these instructions recommend the use of personal protective
equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective
gloves and safety shoes.
2.4 Classification of the warnings
The warnings used in the operating instructions are divided into four different levels and shown
prior to potentially dangerous work steps. Arranged in descending order of importance, they
have the following meanings:
BAL.0843.0 • 2020-11-03
2 Safety
EN - 5